Metal Cutting Tools
HACKSAW BLADE
A hacksaw is a hand saw with a blade held in a frame, utilized for cutting materials such as plastics or metal. Handheld hacksaws consist of a metal arch with pins for attaching a narrow non reusable blade. A screw or other system is used to put the thin blade under tension. The blade can be installed with the teeth going toward or far away from the hacksaw’s handle resulting its cutting action to be either push or pull stroke. Regarding the push stroke, the arch will be flexed slightly, decreasing the stress on the blade, commonly leading to an increased tendency of the blade to split and buckle. Cutting on the pull stroke enhances the blade stress and will result in higher control of the cut and longer blade life. Hacksaw blade specifications: The most typical blade is the 12 inch or 300 mm length. Hacksaw blades have two holes near the ends for installing them in the saw frame and the 12 inch/ 300 mm measurement refers to the center to center range between these installing holes.
ALL HARD HIGH SPEED STEEL
High Speed Power hacksaw blades of high speed steel can accomplish the highest demands for power sawing bars, tubes, sections, and so on. High Speed blades are specifically solidified and precision set. Blades ideal for machine can also be produced.
When the work is held securely and the blade is not subjected to bending and twisting stresses, these blades are ideal to use. They hold the edge when cutting hard-to-machine alloys, preserving straightness of the cut. The blades are evenly hardened throughout.
BIMETAL FLEXIBLE HIGH SPEED STEEL
Integrating 2 materials, tooth line with high alloy high speed steel and body of difficult device steel the blade results in optimum using strength and cutting ability, making it far superior to normal high-speed steel blades. Blades ideal for machines can also be produced.
These blades have solidified, high speed steel teeth with a difficult, shock-absorbing back. They are excellent and shatter-resistant for disturbed cuts and sawing in cramped locations where the blade is subject to bending and twisting stresses.
VARI TOOTH HACKSAW BLADES.
Vari Tooth Hacksaw Blade are primarily used for Pipeline, tubing, solids, wood, plastic or any machinable metal. It is Vacuum heat treating creates more difficult edge for faster, simpler cutting and is has High speed steel cutting edge with 8 % cobalt for longer blade life. VARI Tooth hacksaw blades have actually increased heat and use resistance for longer life.
Tool Bits
HIGH SPEED STEEL DEVICE BITS are manufactured from the finest quality Cobalt, Molybdenum & Tungsten bearing grades of High Speed Steel. Commonly made use for machining and variety of ferrous and nonferrous metals. Advanced heat treatment offers more life between two regrinds.
JIGSAW & RECIPROCATING SAW BLADES.
The Jigsaw & Reciprocating Saw Blades blades are used for straight cutting profile cutting of materials ranging from wood, plastic to metals. We manufacture blades appropriate for the machines of different brands.
The bimetal blades have a high speed steel cutting edge welded to a tough, versatile back. This combination supplies long life and makes them practically unbreakable.
These blades are utilized in hand-held power tools and are commonly subjected to flexing and twisting. We also offer a line of carbon steel jigsaw blades, generally for wood cutting, that utilize an excellent value for the occasional user.
BIMETAL BANDSAW BLADES
Bimetal Bandsaw Blades are integrating of 2 materials, tooth line with high alloy high speed steel and body of hard tool steel the blade leads to maximum using stamina and cutting ability, making it far remarkable to regular high-speed steel blades.
A bandsaw is a power tool which makes use of a blade consisting of a continuous band of metal with teeth along one edge to cut numerous workpieces. The band generally trips on two wheels rotating in the exact same airplane, although some bandsaws might have three or 4 wheels.
Bandsawing produces uniform cutting action as a result of a uniformly dispersed tooth load. Bandsaws are used for woodworking, metalworking, or for cutting a variety of other products, and are specifically useful for cutting curved or irregular shapes, however can also be utilized to produce straight cuts.
The minimum radius of a curve that can be cut on a specific saw is figured out by the width of the band and its kerf. These blades are utilized for cutting Quenched and tempered steel, Case hardened steel, High alloy steel, Hot work steel, Nitriding steel, Stainless steel, High speed steel, Cast iron steel, Corrosion and heat resistant steel. It can be used for Hardened material up to 45 HRC.